Welcome to Medusa Pro Software version 1.7.7.
Started.
Reader #0: FT SCR2000 0
Reader #1: Generic EMV Smartcard Reader 0
Reader #2: Generic EMV Smartcard Reader 1
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC HAG4a2
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A484147346132A5DEB432AC160D
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : HAG4a2
Product revision : 10.5
Product serial number : (hex) DEB432AC
Manufacturing date : 01/2019
---------------------------------------------------------------
CSD Info
CSD : D02701328F5903FFFFFFFFE78A400017
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7692288 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : ab400000 bytes
Device sector size : 512 bytes
Partition offset : 2064384
Number of sectors : 7030784
Build ID :OPM1.171019.026
Release ID :8.1.0
Architecture ABI :arm64-v8a
Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi
Build Description :msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20190323.213841 release-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/HAG4a2_01_07_2019_11_49_18.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.7; FW: 1.24.
P00: GPT (00000000, 00000028) 20 KB
P01: oppodycnvbk (00000028, 00005000) 10 MB
P02: oppostanvbk (00005028, 00005000) 10 MB
P03: modemst1 (0000A028, 00000C00) 1536 KB
P04: modemst2 (0000AC28, 00000C00) 1536 KB
P05: persist (0000B828, 00010000) 32 MB
P06: opporeserve1 (0001B828, 00004000) 8 MB
P07: opporeserve2 (0001F828, 00020000) 64 MB
P08: reserve_exp1 (0003F828, 00001000) 2048 KB
P09: reserve_exp2 (00040828, 00001000) 2048 KB
P10: fsc (00041828, 00000002) 1024 b
P11: ssd (00041830, 00000010) 8 KB
P12: sbl1 (00041840, 00000400) 512 KB
P13: rpm (00041C40, 00000400) 512 KB
P14: tz (00042040, 00001000) 2048 KB
P15: devcfg (00043040, 00000200) 256 KB
P16: sbl1bak (00043240, 00000400) 512 KB
P17: rpmbak (00043640, 00000400) 512 KB
P18: tzbak (00043A40, 00001000) 2048 KB
P19: devcfgbak (00044A40, 00000200) 256 KB
P20: dsp (00044C40, 00008000) 16 MB
P21: DDR (00050000, 00000040) 32 KB
P22: fsg (00050040, 00000C00) 1536 KB
P23: sec (00050C40, 00000020) 16 KB
P24: aboot (00050C60, 00000800) 1024 KB
P25: abootbak (00051460, 00000800) 1024 KB
P26: modem (00051C60, 00040000) 128 MB
P27: dtbo (00091C60, 00004000) 8 MB
P28: vbmeta (00095C60, 00000080) 64 KB
P29: boot (00095CE0, 00020000) 64 MB
P30: recovery (000B5CE0, 00020000) 64 MB
P31: devinfo (000D5CE0, 00000800) 1024 KB
P32: splash (000D8000, 00005800) 11 MB
P33: LOGO (000DD800, 00010000) 32 MB
P34: DRIVER (000ED800, 00010000) 32 MB
P35: cache (000FD800, 00080000) 256 MB
P36: misc (0017D800, 00000800) 1024 KB
P37: keystore (0017E000, 00000400) 512 KB
P38: config (0017E400, 00000040) 32 KB
P39: oem (0017E440, 00000800) 1024 KB
P40: limits (00180000, 00000040) 32 KB
P41: mota (00184000, 00000400) 512 KB
P42: dip (00184400, 00000800) 1024 KB
P43: mdtp (00184C00, 00010000) 32 MB
P44: syscfg (00194C00, 00000400) 512 KB
P45: mcfg (00195000, 00002000) 4 MB
P46: lksecapp (00198000, 00000100) 128 KB
P47: cmnlib (00198100, 00000800) 1024 KB
P48: cmnlib64 (00198900, 00000800) 1024 KB
P49: keymaster (00199100, 00000800) 1024 KB
P50: lksecappbak (00199900, 00000100) 128 KB
P51: cmnlibbak (00199A00, 00000800) 1024 KB
P52: cmnlib64bak (0019A200, 00000800) 1024 KB
P53: keymasterbak (0019AA00, 00000800) 1024 KB
P54: apdp (0019C000, 00000200) 256 KB
P55: msadp (0019C200, 00000200) 256 KB
P56: dpo (0019C400, 00000010) 8 KB
P57: logdump (0019C410, 00020000) 64 MB
P58: vm-kystore (001BC410, 00000800) 1024 KB
P59: vm-data (001BCC10, 00005000) 10 MB
P60: hyp (001C4000, 00004000) 8 MB
P61: vm-system (001C8000, 00020000) 64 MB
P62: vm-linux (001E8000, 00010000) 32 MB
P63: system (001F8000, 006B4800) 3433 MB
P64: vendor (008AC800, 0020FB00) 1055 MB
P65: userdata (00AC0000, 01299FDF) 9.301 GB
Selected file: E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/rawprogram0.xml.
Selected file: E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/patch0.xml.
Save to H:/ file...
Reading partition GPT... Done.
Reading partition oppodycnvbk... Done.
Reading partition oppostanvbk... Done.
Reading partition modemst1... Done.
Reading partition modemst2... Done.
Reading partition persist... Done.
Reading partition opporeserve1... Done.
Reading partition opporeserve2... Done.
Reading partition reserve_exp1... Done.
Reading partition reserve_exp2... Done.
Reading partition fsc... Done.
Reading partition ssd... Done.
Reading partition sbl1... Done.
Reading partition rpm... Done.
Reading partition tz... Done.
Reading partition devcfg... Done.
Reading partition sbl1bak... Done.
Reading partition rpmbak... Done.
Reading partition tzbak... Done.
Reading partition devcfgbak... Done.
Reading partition dsp... Done.
Reading partition DDR... Done.
Reading partition fsg... Done.
Reading partition sec... Done.
Reading partition aboot... Done.
Reading partition abootbak... Done.
Reading partition modem... Done.
Reading partition dtbo... Done.
Reading partition vbmeta... Done.
Reading partition boot... Done.
Reading partition recovery... Done.
Reading partition devinfo... Done.
Reading partition splash... Done.
Reading partition LOGO... Done.
Reading partition DRIVER... Done.
Reading partition cache... Done.
Reading partition misc... Done.
Reading partition keystore... Done.
Reading partition config... Done.
Reading partition oem... Done.
Reading partition limits... Done.
Reading partition mota... Done.
Reading partition dip... Done.
Reading partition mdtp... Done.
Reading partition syscfg... Done.
Reading partition mcfg... Done.
Reading partition lksecapp... Done.
Reading partition cmnlib... Done.
Reading partition cmnlib64... Done.
Reading partition keymaster... Done.
Reading partition lksecappbak... Done.
Reading partition cmnlibbak... Done.
Reading partition cmnlib64bak... Done.
Reading partition keymasterbak... Done.
Reading partition apdp... Done.
Reading partition msadp... Done.
Reading partition dpo... Done.
Reading partition logdump... Done.
Reading partition vm-kystore... Done.
Reading partition vm-data... Done.
Reading partition hyp... Done.
Reading partition vm-system... Done.
Reading partition vm-linux... Done.
Reading partition system... Done.
Reading partition vendor... Done.
Reading is finished.
SW: 1.7.7; FW: 1.24.
Selected file: E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/rawprogram0.xml.
Backuping. Please wait...
Reading partition modemst1... Done.
Reading partition modemst2... Done.
Backuping finished.
#grenWriting. Please wait...
Write data verification is enabled.
Writing partition cache... Done.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/system.img open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/vendor.img open failed.
Writing finished.
SW: 1.7.7; FW: 1.24.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC HAG4a2
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A484147346132A5DEB432AC160D
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : HAG4a2
Product revision : 10.5
Product serial number : (hex) DEB432AC
Manufacturing date : 01/2019
---------------------------------------------------------------
CSD Info
CSD : D02701328F5903FFFFFFFFE78A400017
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7692288 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : ab400000 bytes
Device sector size : 512 bytes
Partition offset : 2064384
Number of sectors : 7030784
Build ID :OPM1.171019.026
Release ID :8.1.0
Architecture ABI :arm64-v8a
Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi
Build Description :msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20190323.213841 release-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/HAG4a2_01_07_2019_13_08_09.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.7; FW: 1.24.
P00: GPT (00000000, 00000028) 20 KB
P01: oppodycnvbk (00000028, 00005000) 10 MB
P02: oppostanvbk (00005028, 00005000) 10 MB
P03: modemst1 (0000A028, 00000C00) 1536 KB
P04: modemst2 (0000AC28, 00000C00) 1536 KB
P05: persist (0000B828, 00010000) 32 MB
P06: opporeserve1 (0001B828, 00004000) 8 MB
P07: opporeserve2 (0001F828, 00020000) 64 MB
P08: reserve_exp1 (0003F828, 00001000) 2048 KB
P09: reserve_exp2 (00040828, 00001000) 2048 KB
P10: fsc (00041828, 00000002) 1024 b
P11: ssd (00041830, 00000010) 8 KB
P12: sbl1 (00041840, 00000400) 512 KB
P13: rpm (00041C40, 00000400) 512 KB
P14: tz (00042040, 00001000) 2048 KB
P15: devcfg (00043040, 00000200) 256 KB
P16: sbl1bak (00043240, 00000400) 512 KB
P17: rpmbak (00043640, 00000400) 512 KB
P18: tzbak (00043A40, 00001000) 2048 KB
P19: devcfgbak (00044A40, 00000200) 256 KB
P20: dsp (00044C40, 00008000) 16 MB
P21: DDR (00050000, 00000040) 32 KB
P22: fsg (00050040, 00000C00) 1536 KB
P23: sec (00050C40, 00000020) 16 KB
P24: aboot (00050C60, 00000800) 1024 KB
P25: abootbak (00051460, 00000800) 1024 KB
P26: modem (00051C60, 00040000) 128 MB
P27: dtbo (00091C60, 00004000) 8 MB
P28: vbmeta (00095C60, 00000080) 64 KB
P29: boot (00095CE0, 00020000) 64 MB
P30: recovery (000B5CE0, 00020000) 64 MB
P31: devinfo (000D5CE0, 00000800) 1024 KB
P32: splash (000D8000, 00005800) 11 MB
P33: LOGO (000DD800, 00010000) 32 MB
P34: DRIVER (000ED800, 00010000) 32 MB
P35: cache (000FD800, 00080000) 256 MB
P36: misc (0017D800, 00000800) 1024 KB
P37: keystore (0017E000, 00000400) 512 KB
P38: config (0017E400, 00000040) 32 KB
P39: oem (0017E440, 00000800) 1024 KB
P40: limits (00180000, 00000040) 32 KB
P41: mota (00184000, 00000400) 512 KB
P42: dip (00184400, 00000800) 1024 KB
P43: mdtp (00184C00, 00010000) 32 MB
P44: syscfg (00194C00, 00000400) 512 KB
P45: mcfg (00195000, 00002000) 4 MB
P46: lksecapp (00198000, 00000100) 128 KB
P47: cmnlib (00198100, 00000800) 1024 KB
P48: cmnlib64 (00198900, 00000800) 1024 KB
P49: keymaster (00199100, 00000800) 1024 KB
P50: lksecappbak (00199900, 00000100) 128 KB
P51: cmnlibbak (00199A00, 00000800) 1024 KB
P52: cmnlib64bak (0019A200, 00000800) 1024 KB
P53: keymasterbak (0019AA00, 00000800) 1024 KB
P54: apdp (0019C000, 00000200) 256 KB
P55: msadp (0019C200, 00000200) 256 KB
P56: dpo (0019C400, 00000010) 8 KB
P57: logdump (0019C410, 00020000) 64 MB
P58: vm-kystore (001BC410, 00000800) 1024 KB
P59: vm-data (001BCC10, 00005000) 10 MB
P60: hyp (001C4000, 00004000) 8 MB
P61: vm-system (001C8000, 00020000) 64 MB
P62: vm-linux (001E8000, 00010000) 32 MB
P63: system (001F8000, 006B4800) 3433 MB
P64: vendor (008AC800, 0020FB00) 1055 MB
P65: userdata (00AC0000, 01299FDF) 9.301 GB
Selected file: E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/rawprogram0.xml.
Backuping. Please wait...
Reading partition modemst1... Done.
Reading partition modemst2... Done.
Backuping finished.
#grenWriting. Please wait...
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/sbl1.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/rpm.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/tz.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/devcfg.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/adspso.bin open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/sec.dat open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/emmc_appsboot.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/emmc_appsboot.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/NON-HLOS.bin open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/dtbo.img open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/vbmeta.img open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/boot.img open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/recovery.img open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/logo.bin open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/DRIVER.ISO open failed.
Write data verification is enabled.
Writing partition cache... Done.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/mdtp.img open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/lksecapp.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/cmnlib_30.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/cmnlib64_30.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/keymaster64.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/lksecapp.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/cmnlib_30.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/cmnlib64_30.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/keymaster64.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/dpAP.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/system.img open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/vendor.img open failed.
Writing MBR...Done.
Writing primary GPT...Done.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/gpt_main0.bin open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/gpt_backup0.bin open failed.
Writing finished.
SW: 1.7.7; FW: 1.24.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC HAG4a2
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A484147346132A5DEB432AC160D
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : HAG4a2
Product revision : 10.5
Product serial number : (hex) DEB432AC
Manufacturing date : 01/2019
---------------------------------------------------------------
CSD Info
CSD : D02701328F5903FFFFFFFFE78A400017
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7692288 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/HAG4a2_01_07_2019_13_41_44.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.7; FW: 1.24.
Selected file: E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/rawprogram0.xml.
Selected file: E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/patch0.xml.
Backuping. Please wait...
Reading partition modemst1... Done.
Reading partition modemst2... Done.
Backuping finished.
#grenWriting. Please wait...
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/dynamic_nvbk.bin open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/static_nvbk.bin open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/persist.img open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/emmc_fw.bin open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/opporeserve2.img open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/sbl1.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/rpm.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/tz.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/devcfg.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/sbl1.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/rpm.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/tz.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/devcfg.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/adspso.bin open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/sec.dat open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/emmc_appsboot.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/emmc_appsboot.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/NON-HLOS.bin open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/dtbo.img open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/vbmeta.img open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/boot.img open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/recovery.img open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/logo.bin open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/DRIVER.ISO open failed.
Write data verification is enabled.
Writing partition cache... Done.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/mdtp.img open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/lksecapp.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/cmnlib_30.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/cmnlib64_30.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/keymaster64.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/lksecapp.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/cmnlib_30.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/cmnlib64_30.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/keymaster64.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/dpAP.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/system.img open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/vendor.img open failed.
Writing MBR...Done.
Writing primary GPT...Done.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/gpt_main0.bin open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/gpt_backup0.bin open failed.
Writing finished.
SW: 1.7.7; FW: 1.24.
Disconnected.
Started.
Reader #0: FT SCR2000 0
Reader #1: Generic EMV Smartcard Reader 0
Reader #2: Generic EMV Smartcard Reader 1
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC HAG4a2
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A484147346132A5DEB432AC160D
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : HAG4a2
Product revision : 10.5
Product serial number : (hex) DEB432AC
Manufacturing date : 01/2019
---------------------------------------------------------------
CSD Info
CSD : D02701328F5903FFFFFFFFE78A400017
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7692288 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : ab400000 bytes
Device sector size : 512 bytes
Partition offset : 2064384
Number of sectors : 7030784
Build ID :OPM1.171019.026
Release ID :8.1.0
Architecture ABI :arm64-v8a
Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi
Build Description :msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20190323.213841 release-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/HAG4a2_01_07_2019_11_49_18.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.7; FW: 1.24.
P00: GPT (00000000, 00000028) 20 KB
P01: oppodycnvbk (00000028, 00005000) 10 MB
P02: oppostanvbk (00005028, 00005000) 10 MB
P03: modemst1 (0000A028, 00000C00) 1536 KB
P04: modemst2 (0000AC28, 00000C00) 1536 KB
P05: persist (0000B828, 00010000) 32 MB
P06: opporeserve1 (0001B828, 00004000) 8 MB
P07: opporeserve2 (0001F828, 00020000) 64 MB
P08: reserve_exp1 (0003F828, 00001000) 2048 KB
P09: reserve_exp2 (00040828, 00001000) 2048 KB
P10: fsc (00041828, 00000002) 1024 b
P11: ssd (00041830, 00000010) 8 KB
P12: sbl1 (00041840, 00000400) 512 KB
P13: rpm (00041C40, 00000400) 512 KB
P14: tz (00042040, 00001000) 2048 KB
P15: devcfg (00043040, 00000200) 256 KB
P16: sbl1bak (00043240, 00000400) 512 KB
P17: rpmbak (00043640, 00000400) 512 KB
P18: tzbak (00043A40, 00001000) 2048 KB
P19: devcfgbak (00044A40, 00000200) 256 KB
P20: dsp (00044C40, 00008000) 16 MB
P21: DDR (00050000, 00000040) 32 KB
P22: fsg (00050040, 00000C00) 1536 KB
P23: sec (00050C40, 00000020) 16 KB
P24: aboot (00050C60, 00000800) 1024 KB
P25: abootbak (00051460, 00000800) 1024 KB
P26: modem (00051C60, 00040000) 128 MB
P27: dtbo (00091C60, 00004000) 8 MB
P28: vbmeta (00095C60, 00000080) 64 KB
P29: boot (00095CE0, 00020000) 64 MB
P30: recovery (000B5CE0, 00020000) 64 MB
P31: devinfo (000D5CE0, 00000800) 1024 KB
P32: splash (000D8000, 00005800) 11 MB
P33: LOGO (000DD800, 00010000) 32 MB
P34: DRIVER (000ED800, 00010000) 32 MB
P35: cache (000FD800, 00080000) 256 MB
P36: misc (0017D800, 00000800) 1024 KB
P37: keystore (0017E000, 00000400) 512 KB
P38: config (0017E400, 00000040) 32 KB
P39: oem (0017E440, 00000800) 1024 KB
P40: limits (00180000, 00000040) 32 KB
P41: mota (00184000, 00000400) 512 KB
P42: dip (00184400, 00000800) 1024 KB
P43: mdtp (00184C00, 00010000) 32 MB
P44: syscfg (00194C00, 00000400) 512 KB
P45: mcfg (00195000, 00002000) 4 MB
P46: lksecapp (00198000, 00000100) 128 KB
P47: cmnlib (00198100, 00000800) 1024 KB
P48: cmnlib64 (00198900, 00000800) 1024 KB
P49: keymaster (00199100, 00000800) 1024 KB
P50: lksecappbak (00199900, 00000100) 128 KB
P51: cmnlibbak (00199A00, 00000800) 1024 KB
P52: cmnlib64bak (0019A200, 00000800) 1024 KB
P53: keymasterbak (0019AA00, 00000800) 1024 KB
P54: apdp (0019C000, 00000200) 256 KB
P55: msadp (0019C200, 00000200) 256 KB
P56: dpo (0019C400, 00000010) 8 KB
P57: logdump (0019C410, 00020000) 64 MB
P58: vm-kystore (001BC410, 00000800) 1024 KB
P59: vm-data (001BCC10, 00005000) 10 MB
P60: hyp (001C4000, 00004000) 8 MB
P61: vm-system (001C8000, 00020000) 64 MB
P62: vm-linux (001E8000, 00010000) 32 MB
P63: system (001F8000, 006B4800) 3433 MB
P64: vendor (008AC800, 0020FB00) 1055 MB
P65: userdata (00AC0000, 01299FDF) 9.301 GB
Selected file: E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/rawprogram0.xml.
Selected file: E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/patch0.xml.
Save to H:/ file...
Reading partition GPT... Done.
Reading partition oppodycnvbk... Done.
Reading partition oppostanvbk... Done.
Reading partition modemst1... Done.
Reading partition modemst2... Done.
Reading partition persist... Done.
Reading partition opporeserve1... Done.
Reading partition opporeserve2... Done.
Reading partition reserve_exp1... Done.
Reading partition reserve_exp2... Done.
Reading partition fsc... Done.
Reading partition ssd... Done.
Reading partition sbl1... Done.
Reading partition rpm... Done.
Reading partition tz... Done.
Reading partition devcfg... Done.
Reading partition sbl1bak... Done.
Reading partition rpmbak... Done.
Reading partition tzbak... Done.
Reading partition devcfgbak... Done.
Reading partition dsp... Done.
Reading partition DDR... Done.
Reading partition fsg... Done.
Reading partition sec... Done.
Reading partition aboot... Done.
Reading partition abootbak... Done.
Reading partition modem... Done.
Reading partition dtbo... Done.
Reading partition vbmeta... Done.
Reading partition boot... Done.
Reading partition recovery... Done.
Reading partition devinfo... Done.
Reading partition splash... Done.
Reading partition LOGO... Done.
Reading partition DRIVER... Done.
Reading partition cache... Done.
Reading partition misc... Done.
Reading partition keystore... Done.
Reading partition config... Done.
Reading partition oem... Done.
Reading partition limits... Done.
Reading partition mota... Done.
Reading partition dip... Done.
Reading partition mdtp... Done.
Reading partition syscfg... Done.
Reading partition mcfg... Done.
Reading partition lksecapp... Done.
Reading partition cmnlib... Done.
Reading partition cmnlib64... Done.
Reading partition keymaster... Done.
Reading partition lksecappbak... Done.
Reading partition cmnlibbak... Done.
Reading partition cmnlib64bak... Done.
Reading partition keymasterbak... Done.
Reading partition apdp... Done.
Reading partition msadp... Done.
Reading partition dpo... Done.
Reading partition logdump... Done.
Reading partition vm-kystore... Done.
Reading partition vm-data... Done.
Reading partition hyp... Done.
Reading partition vm-system... Done.
Reading partition vm-linux... Done.
Reading partition system... Done.
Reading partition vendor... Done.
Reading is finished.
SW: 1.7.7; FW: 1.24.
Selected file: E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/rawprogram0.xml.
Backuping. Please wait...
Reading partition modemst1... Done.
Reading partition modemst2... Done.
Backuping finished.
#grenWriting. Please wait...
Write data verification is enabled.
Writing partition cache... Done.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/system.img open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/vendor.img open failed.
Writing finished.
SW: 1.7.7; FW: 1.24.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC HAG4a2
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A484147346132A5DEB432AC160D
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : HAG4a2
Product revision : 10.5
Product serial number : (hex) DEB432AC
Manufacturing date : 01/2019
---------------------------------------------------------------
CSD Info
CSD : D02701328F5903FFFFFFFFE78A400017
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7692288 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : ab400000 bytes
Device sector size : 512 bytes
Partition offset : 2064384
Number of sectors : 7030784
Build ID :OPM1.171019.026
Release ID :8.1.0
Architecture ABI :arm64-v8a
Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi
Build Description :msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20190323.213841 release-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/HAG4a2_01_07_2019_13_08_09.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.7; FW: 1.24.
P00: GPT (00000000, 00000028) 20 KB
P01: oppodycnvbk (00000028, 00005000) 10 MB
P02: oppostanvbk (00005028, 00005000) 10 MB
P03: modemst1 (0000A028, 00000C00) 1536 KB
P04: modemst2 (0000AC28, 00000C00) 1536 KB
P05: persist (0000B828, 00010000) 32 MB
P06: opporeserve1 (0001B828, 00004000) 8 MB
P07: opporeserve2 (0001F828, 00020000) 64 MB
P08: reserve_exp1 (0003F828, 00001000) 2048 KB
P09: reserve_exp2 (00040828, 00001000) 2048 KB
P10: fsc (00041828, 00000002) 1024 b
P11: ssd (00041830, 00000010) 8 KB
P12: sbl1 (00041840, 00000400) 512 KB
P13: rpm (00041C40, 00000400) 512 KB
P14: tz (00042040, 00001000) 2048 KB
P15: devcfg (00043040, 00000200) 256 KB
P16: sbl1bak (00043240, 00000400) 512 KB
P17: rpmbak (00043640, 00000400) 512 KB
P18: tzbak (00043A40, 00001000) 2048 KB
P19: devcfgbak (00044A40, 00000200) 256 KB
P20: dsp (00044C40, 00008000) 16 MB
P21: DDR (00050000, 00000040) 32 KB
P22: fsg (00050040, 00000C00) 1536 KB
P23: sec (00050C40, 00000020) 16 KB
P24: aboot (00050C60, 00000800) 1024 KB
P25: abootbak (00051460, 00000800) 1024 KB
P26: modem (00051C60, 00040000) 128 MB
P27: dtbo (00091C60, 00004000) 8 MB
P28: vbmeta (00095C60, 00000080) 64 KB
P29: boot (00095CE0, 00020000) 64 MB
P30: recovery (000B5CE0, 00020000) 64 MB
P31: devinfo (000D5CE0, 00000800) 1024 KB
P32: splash (000D8000, 00005800) 11 MB
P33: LOGO (000DD800, 00010000) 32 MB
P34: DRIVER (000ED800, 00010000) 32 MB
P35: cache (000FD800, 00080000) 256 MB
P36: misc (0017D800, 00000800) 1024 KB
P37: keystore (0017E000, 00000400) 512 KB
P38: config (0017E400, 00000040) 32 KB
P39: oem (0017E440, 00000800) 1024 KB
P40: limits (00180000, 00000040) 32 KB
P41: mota (00184000, 00000400) 512 KB
P42: dip (00184400, 00000800) 1024 KB
P43: mdtp (00184C00, 00010000) 32 MB
P44: syscfg (00194C00, 00000400) 512 KB
P45: mcfg (00195000, 00002000) 4 MB
P46: lksecapp (00198000, 00000100) 128 KB
P47: cmnlib (00198100, 00000800) 1024 KB
P48: cmnlib64 (00198900, 00000800) 1024 KB
P49: keymaster (00199100, 00000800) 1024 KB
P50: lksecappbak (00199900, 00000100) 128 KB
P51: cmnlibbak (00199A00, 00000800) 1024 KB
P52: cmnlib64bak (0019A200, 00000800) 1024 KB
P53: keymasterbak (0019AA00, 00000800) 1024 KB
P54: apdp (0019C000, 00000200) 256 KB
P55: msadp (0019C200, 00000200) 256 KB
P56: dpo (0019C400, 00000010) 8 KB
P57: logdump (0019C410, 00020000) 64 MB
P58: vm-kystore (001BC410, 00000800) 1024 KB
P59: vm-data (001BCC10, 00005000) 10 MB
P60: hyp (001C4000, 00004000) 8 MB
P61: vm-system (001C8000, 00020000) 64 MB
P62: vm-linux (001E8000, 00010000) 32 MB
P63: system (001F8000, 006B4800) 3433 MB
P64: vendor (008AC800, 0020FB00) 1055 MB
P65: userdata (00AC0000, 01299FDF) 9.301 GB
Selected file: E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/rawprogram0.xml.
Backuping. Please wait...
Reading partition modemst1... Done.
Reading partition modemst2... Done.
Backuping finished.
#grenWriting. Please wait...
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/sbl1.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/rpm.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/tz.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/devcfg.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/adspso.bin open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/sec.dat open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/emmc_appsboot.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/emmc_appsboot.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/NON-HLOS.bin open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/dtbo.img open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/vbmeta.img open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/boot.img open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/recovery.img open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/logo.bin open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/DRIVER.ISO open failed.
Write data verification is enabled.
Writing partition cache... Done.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/mdtp.img open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/lksecapp.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/cmnlib_30.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/cmnlib64_30.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/keymaster64.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/lksecapp.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/cmnlib_30.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/cmnlib64_30.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/keymaster64.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/dpAP.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/system.img open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/vendor.img open failed.
Writing MBR...Done.
Writing primary GPT...Done.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/gpt_main0.bin open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/gpt_backup0.bin open failed.
Writing finished.
SW: 1.7.7; FW: 1.24.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC HAG4a2
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A484147346132A5DEB432AC160D
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : HAG4a2
Product revision : 10.5
Product serial number : (hex) DEB432AC
Manufacturing date : 01/2019
---------------------------------------------------------------
CSD Info
CSD : D02701328F5903FFFFFFFFE78A400017
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7692288 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/HAG4a2_01_07_2019_13_41_44.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.7; FW: 1.24.
Selected file: E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/rawprogram0.xml.
Selected file: E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/patch0.xml.
Backuping. Please wait...
Reading partition modemst1... Done.
Reading partition modemst2... Done.
Backuping finished.
#grenWriting. Please wait...
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/dynamic_nvbk.bin open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/static_nvbk.bin open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/persist.img open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/emmc_fw.bin open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/opporeserve2.img open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/sbl1.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/rpm.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/tz.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/devcfg.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/sbl1.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/rpm.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/tz.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/devcfg.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/adspso.bin open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/sec.dat open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/emmc_appsboot.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/emmc_appsboot.mbn open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/NON-HLOS.bin open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/dtbo.img open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/vbmeta.img open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/boot.img open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/recovery.img open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/logo.bin open failed.
Write data verification is enabled.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/DRIVER.ISO open failed.
Write data verification is enabled.
Writing partition cache... Done.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/mdtp.img open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/lksecapp.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/cmnlib_30.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/cmnlib64_30.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/keymaster64.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/lksecapp.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/cmnlib_30.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/cmnlib64_30.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/keymaster64.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/dpAP.mbn open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/system.img open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/vendor.img open failed.
Writing MBR...Done.
Writing primary GPT...Done.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/gpt_main0.bin open failed.
File E:/Oppo A3S-CPH1803EX_Bondowoso Flasher/gpt_backup0.bin open failed.
Writing finished.
SW: 1.7.7; FW: 1.24.
Disconnected.
