LG MS631 Fully Rebirth to Android 6
Steps:
-Select H631 Model for Operations
-Remove Samsung Write Protect
-Erase Device
-Use Factory Repair (use lastest Firmware Available for your device)
Best Regards
Shensohau
Code:
Welcome to Medusa Pro Software version 1.7.7.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : H631
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_H631_EMMC_R311MB.srf
Voltage : 2.2V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC R311MB
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100523331314D4201E1A4CAB062DF
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : R311MB
Product revision : 0.1
Product serial number : (hex) E1A4CAB0
Manufacturing date : 06/2015
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7626752 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : a3e00000 bytes
Device sector size : 512 bytes
Partition offset : 603136
Number of sectors : 5242880
Device Manufacturer :MetroPCS
Device Platform :msm8916
Build ID :LMY47V
Display Build ID :LMY47V
Release ID :5.1.1
Device Model :LGMS631
Device Name :g4stylusn_mpcs_us
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Architecture ABI List :armeabi-v7a,armeabi
Build Description :g4stylusn_mpcs_us-user 5.1.1 LMY47V 152441547101b release-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/R311MB_19_07_2019_13_01_29.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.7; FW: 1.24.
P00: GPT (00000000, 00000400) 512 KB
P01: sbl1 (00000400, 00000400) 512 KB
P02: tz (00000800, 00000400) 512 KB
P03: hyp (00000C00, 00000400) 512 KB
P04: rpm (00001000, 00000400) 512 KB
P05: aboot (00001400, 00001000) 2048 KB
P06: pad (00002400, 00000C00) 1536 KB
P07: sbl1bak (00003000, 00000400) 512 KB
P08: tzbak (00003400, 00000400) 512 KB
P09: hypbak (00003800, 00000400) 512 KB
P10: rpmbak (00003C00, 00000400) 512 KB
P11: abootbak (00004000, 00001000) 2048 KB
P12: misc (00005000, 00008000) 16 MB
P13: persist (0000D000, 00008000) 16 MB
P14: metadata (00015000, 00000400) 512 KB
P15: modemst1 (00015400, 00000C00) 1536 KB
P16: modemst2 (00016000, 00000C00) 1536 KB
P17: laf (00016C00, 0000C000) 24 MB
P18: boot (00022C00, 0000C000) 24 MB
P19: recovery (0002EC00, 0000C000) 24 MB
P20: fsg (0003AC00, 00000C00) 1536 KB
P21: fsc (0003B800, 00000400) 512 KB
P22: ssd (0003BC00, 00000400) 512 KB
P23: DDR (0003C000, 00000400) 512 KB
P24: sec (0003C400, 00000400) 512 KB
P25: encrypt (0003C800, 00000400) 512 KB
P26: eksst (0003CC00, 00000400) 512 KB
P27: rct (0003D000, 00000400) 512 KB
P28: sns (0003D400, 00004000) 8 MB
P29: factory (00041400, 00010000) 32 MB
P30: fota (00051400, 00010000) 32 MB
P31: drm (00061400, 00004000) 8 MB
P32: mpt (00065400, 0000C000) 24 MB
P33: modem (00071400, 00020000) 64 MB
P34: persistent (00091400, 00001000) 2048 KB
P35: pad2 (00092400, 00001000) 2048 KB
P36: system (00093400, 00500000) 2560 MB
P37: cache (00593400, 001C2000) 900 MB
P38: userdata (00755400, 015C0000) 10.88 GB
P39: grow (01D15400, 00009BDF) 19.48 MB
Erasing partition GPT... Done.
Erasing partition sbl1... Done.
Erasing partition tz... Done.
Erasing partition hyp... Done.
Erasing partition rpm... Done.
Erasing partition aboot... Done.
Erasing partition pad... Done.
Erasing partition sbl1bak... Done.
Erasing partition tzbak... Done.
Erasing partition hypbak... Done.
Erasing partition rpmbak... Done.
Erasing partition abootbak... Done.
Erasing partition misc... Done.
Erasing partition persist... Done.
Erasing partition metadata... Done.
Erasing partition modemst1... Done.
Erasing partition modemst2... Done.
Erasing partition laf... Done.
Erasing partition boot... Done.
Erasing partition recovery... Done.
Erasing partition fsg... Done.
Erasing partition fsc... Done.
Erasing partition ssd... Done.
Erasing partition DDR... Done.
Erasing partition sec... Done.
Erasing partition encrypt... Done.
Erasing partition eksst... Done.
Erasing partition rct... Done.
Erasing partition sns... Done.
Erasing partition factory... Done.
Erasing partition fota... Done.
Erasing partition drm... Done.
Erasing partition mpt... Done.
Erasing partition modem... Done.
Erasing partition persistent... Done.
Erasing partition pad2... Done.
Erasing partition system... Done.
Erasing partition cache... Done.
Erasing partition userdata... Done.
Erasing partition grow... Done.
Erasing is finished.
SW: 1.7.7; FW: 1.24.
Opening C:/Program Files/Medusa Pro Software/firmwareFolder/MS63120l_00_0203.kdz file...
Write data verification is enabled.
Writing. Please wait...
Writing partition PrimaryGPT... Done.
Writing partition sbl1... Done.
Writing partition tz... Done.
Writing partition hyp... Done.
Writing partition rpm... Done.
Writing partition aboot... Done.
Writing partition sbl1bak... Done.
Writing partition tzbak... Done.
Writing partition hypbak... Done.
Writing partition rpmbak... Done.
Writing partition abootbak... Done.
Writing partition persist... Done.
Writing partition laf... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Writing partition sec... Done.
Writing partition rct... Done.
Writing partition factory... Done.
Writing partition modem... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition BackupGPT... Done.
Writing is finished.
SW: 1.7.7; FW: 1.24.
Disconnected.
-Select H631 Model for Operations
-Remove Samsung Write Protect
-Erase Device
-Use Factory Repair (use lastest Firmware Available for your device)
Best Regards
Shensohau
