Z831 Boot repair via USB and Test Point

Follow Help button instructions.





Welcome to Medusa Pro Software version 1.7.7.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0


Model Settings:
Interface : USB
Brand : ZTE
Model : Z831
SRF : D:/Medusa PRO/ZTE_Z831_USB.srf
Core : Qualcomm MSM8909
Loader : QLoader_v32_ZTE


Connecting...
Sending loader...OK.
Loader successfully initialized.


Device : CoreID_009600E1
Core : Qualcomm MSM8909
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 1.7.7; FW: 1.24.
P00: GPT (00000000, 00004000) 8 MB
P01: sbl1 (00004000, 00004000) 8 MB
P02: DDR (00008000, 00004000) 8 MB
P03: rpm (0000C000, 00004000) 8 MB
P04: tz (00010000, 00004000) 8 MB
P05: fsg (00014000, 00004000) 8 MB
P06: sec (00018000, 00004000) 8 MB
P07: devinfo (0001C000, 00004000) 8 MB
P08: echarge (00020000, 00008000) 16 MB
P09: splash (00028000, 00008000) 16 MB
P10: aboot (00030000, 00004000) 8 MB
P11: modem (00034000, 0002C000) 88 MB
P12: boot (00060000, 00018000) 48 MB
P13: recovery (00078000, 00018000) 48 MB
P14: pad (00090000, 00004000) 8 MB
P15: pad1 (00094000, 00004000) 8 MB
P16: ztelk (00098000, 00008000) 16 MB
P17: ssd (000A0000, 00004000) 8 MB
P18: ztecfg (000A4000, 00004000) 8 MB
P19: fsc (000A8000, 00004000) 8 MB
P20: modemst1 (000AC000, 00004000) 8 MB
P21: modemst2 (000B0000, 00004000) 8 MB
P22: misc (000B4000, 00004000) 8 MB
P23: keystore (000B8000, 00004000) 8 MB
P24: config (000BC000, 00000800) 1024 KB
P25: oem (000C0000, 00004000) 8 MB
P26: pad3 (000C4000, 00004000) 8 MB
P27: persist (000C8000, 00010000) 32 MB
P28: cache (000D8000, 00108000) 528 MB
P29: system (001E0000, 005A0000) 2880 MB
P30: userdata (00780000, 0070FFDF) 3616 MB
Repairing from file "D:/Medusa PRO/ZTE_Z831_USB.srf".
Write data verification is enabled.
Writing GPT partition... Done.
Writing sbl1 partition... Done.
Writing DDR partition... Done.
Writing rpm partition... Done.
Writing tz partition... Done.
Writing fsg partition... Done.
Writing sec partition... Done.
Writing devinfo partition... Done.
Writing echarge partition... Done.
Writing splash partition... Done.
Writing aboot partition... Done.
Writing modem partition... Done.
Writing boot partition... Done.
Writing recovery partition... Done.
Writing pad partition... Done.
Writing pad1 partition... Done.
Writing ztelk partition... Done.
Writing ssd partition... Done.
Writing ztecfg partition... Done.
Writing fsc partition... Done.
Writing misc partition... Done.
Writing keystore partition... Done.
Writing config partition... Done.
Writing oem partition... Done.
Writing pad3 partition... Done.
Writing persist partition... Done.


Smart Repair is successfully complete.
SW: 1.7.7; FW: 1.24.
Disconnected.


Model Settings:
Interface : USB
Brand : ZTE
Model : Z831
SRF : D:/Medusa PRO/ZTE_Z831_USB.srf
Core : Qualcomm MSM8909
Loader : QLoader_v32_ZTE


Connecting...
Cancelled.