dear blang,
please refun credis log do wrong code 2 times ( 10 credis ) of j250g imei :
354062090711179
login: zsc_sNViWRhO
sn: 00031CC1
log
UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Read Codes via Server
Selected model: SM-J250G
Selected port: COM633 SAMSUNG Mobile USB Serial Port
Software version: 37.0
Checking Login and Password... OK
Ballance: 30 crd.
You have 30 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J250G
Android version: 7.1.1
PDA version: J250GDXU3ASG1
CSC version: J250GTLP3ASE1
Phone version: J250GDXU3ASG1
Product code: SM-J250GZKATLP
CSC country code: Australia
CSC sales code: TLP
Phone SN: R28K41AFK3Y
IMEI: 354062090711179
HW version: MP0.900
RF cal date: 2018.04.13
Chip name: MSM8937
Modem board: MSM8917
Security patch: 2019-06-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM6 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 59463070
NET lock: 28472031
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#
If codes are not accepted, then flash latest firmware
Done with Samsung Tool PRO v.37.0
thanx in advance
please refun credis log do wrong code 2 times ( 10 credis ) of j250g imei :
354062090711179
login: zsc_sNViWRhO
sn: 00031CC1
log
UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Read Codes via Server
Selected model: SM-J250G
Selected port: COM633 SAMSUNG Mobile USB Serial Port
Software version: 37.0
Checking Login and Password... OK
Ballance: 30 crd.
You have 30 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J250G
Android version: 7.1.1
PDA version: J250GDXU3ASG1
CSC version: J250GTLP3ASE1
Phone version: J250GDXU3ASG1
Product code: SM-J250GZKATLP
CSC country code: Australia
CSC sales code: TLP
Phone SN: R28K41AFK3Y
IMEI: 354062090711179
HW version: MP0.900
RF cal date: 2018.04.13
Chip name: MSM8937
Modem board: MSM8917
Security patch: 2019-06-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM6 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 59463070
NET lock: 28472031
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#
If codes are not accepted, then flash latest firmware
Done with Samsung Tool PRO v.37.0
thanx in advance
