HI!
Im trying to downgrade G570m from U6 to U1 (just for testing...)
I conected the phone propertly with the ISP conection
I removed Write protection
but at the moment of write the firmware (factory repair)
it just show error
LOG:
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 4 bits
Bus speed : Auto
Connecting...
Device : Samsung eMMC Q313BB
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 15010051333133424200CC85DC6024C9
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : Q313BB
Product revision : 0.0
Product serial number : (hex) CC85DC60
Manufacturing date : 02/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 4Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x01) 00000001
Boot bus width : x4 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7692288 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/EXT_CSD Backups/Q313BB_17_09_2019_15_29_41.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.7; FW: 1.24.
Please select file.
Selected pit file: F:/Galaxy_J5_Prime_SM-G570M_601_stockrom.net/ON5XELTE_MEA_OPEN.pit
Selected pit file: F:/Galaxy_J5_Prime_SM-G570M_601_stockrom.net/AP_G570MUBU1AQE2_CL11351329_QB13500962_REV00_user_ low_ship.tar.md5
Unknown format of input file F:/Galaxy_J5_Prime_SM-G570M_601_stockrom.net/AP_G570MUBU1AQE2_CL11351329_QB13500962_REV00_user_ low_ship.tar.md5!
Selected pit file: F:/Galaxy_J5_Prime_SM-G570M_601_stockrom.net/ON5XELTE_MEA_OPEN.pit
Open file "F:/Galaxy_J5_Prime_SM-G570M_601_stockrom.net/AP_G570MUBU1AQE2_CL11351329_QB13500962_REV00_user_ low_ship.tar.md5".
Open file "F:/Galaxy_J5_Prime_SM-G570M_601_stockrom.net/BL_G570MUBU1AQE2_CL11351329_QB13500962_REV00_user_ low_ship.tar.md5".
Open file "F:/Galaxy_J5_Prime_SM-G570M_601_stockrom.net/CP_G570MUBU1AQD3_CL11271294_QB13346735_REV00_user_ low_ship.tar.md5".
Open file "F:/Galaxy_J5_Prime_SM-G570M_601_stockrom.net/CSC_ZTO_G570MZTO1AQE3_CL11451375_QB13627002_REV00_ user_low_ship.tar.md5".
Writing MBR...
ERROR[012]: Write error.
At sector 0.
Disconnected.
Why im use such low binary? LZ4 isnt supported by medusa pro
I tried formatting emmc but same error, cant write firmware! or repair boot
Also, the EMMC is good! was working good! (own phone)
so its not hardware problem
Im trying to downgrade G570m from U6 to U1 (just for testing...)
I conected the phone propertly with the ISP conection
I removed Write protection
but at the moment of write the firmware (factory repair)
it just show error
LOG:
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 4 bits
Bus speed : Auto
Connecting...
Device : Samsung eMMC Q313BB
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 15010051333133424200CC85DC6024C9
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : Q313BB
Product revision : 0.0
Product serial number : (hex) CC85DC60
Manufacturing date : 02/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 4Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x01) 00000001
Boot bus width : x4 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7692288 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Octoplus Pro JTAG Software/EXT_CSD Backups/Q313BB_17_09_2019_15_29_41.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.7; FW: 1.24.
Please select file.
Selected pit file: F:/Galaxy_J5_Prime_SM-G570M_601_stockrom.net/ON5XELTE_MEA_OPEN.pit
Selected pit file: F:/Galaxy_J5_Prime_SM-G570M_601_stockrom.net/AP_G570MUBU1AQE2_CL11351329_QB13500962_REV00_user_ low_ship.tar.md5
Unknown format of input file F:/Galaxy_J5_Prime_SM-G570M_601_stockrom.net/AP_G570MUBU1AQE2_CL11351329_QB13500962_REV00_user_ low_ship.tar.md5!
Selected pit file: F:/Galaxy_J5_Prime_SM-G570M_601_stockrom.net/ON5XELTE_MEA_OPEN.pit
Open file "F:/Galaxy_J5_Prime_SM-G570M_601_stockrom.net/AP_G570MUBU1AQE2_CL11351329_QB13500962_REV00_user_ low_ship.tar.md5".
Open file "F:/Galaxy_J5_Prime_SM-G570M_601_stockrom.net/BL_G570MUBU1AQE2_CL11351329_QB13500962_REV00_user_ low_ship.tar.md5".
Open file "F:/Galaxy_J5_Prime_SM-G570M_601_stockrom.net/CP_G570MUBU1AQD3_CL11271294_QB13346735_REV00_user_ low_ship.tar.md5".
Open file "F:/Galaxy_J5_Prime_SM-G570M_601_stockrom.net/CSC_ZTO_G570MZTO1AQE3_CL11451375_QB13627002_REV00_ user_low_ship.tar.md5".
Writing MBR...
ERROR[012]: Write error.
At sector 0.
Disconnected.
Why im use such low binary? LZ4 isnt supported by medusa pro
I tried formatting emmc but same error, cant write firmware! or repair boot
Also, the EMMC is good! was working good! (own phone)
so its not hardware problem