Unlock Oppo and Vivo without dead risk.................................
1. connect with Medusa pro
2. go partition manager
3. tick only MISC and select MISC file
** If u want without data loss dn select "keep data MISC" or If u reset user data dn select "reset MISC"
4. write partition(only tick MISC)
if u see phone still lock !! dont worry, go emergency dial in phone key board and just type *#813#
enjoy.
here is unlock log......................
Welcome to Medusa Pro Software version 1.7.7.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Reader #2: FT SCR2000 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QE63MB
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100514536334D4203D6EDD33465EF
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QE63MB
Product revision : 0.3
Product serial number : (hex) D6EDD334
Manufacturing date : 06/2018
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7626752 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : a3e00000 bytes
Device sector size : 512 bytes
Partition offset : 2064384
Number of sectors : 7030784
Build ID :OPM1.171019.026
Release ID :8.1.0
Architecture ABI :arm64-v8a
Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi
Build Description :msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20190717.054518 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QE63MB_12_09_2019_11_49_48.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.7; FW: 1.24.
P00: GPT (00000000, 00000028) 20 KB
P01: oppodycnvbk (00000028, 00005000) 10 MB
P02: oppostanvbk (00005028, 00005000) 10 MB
P03: modemst1 (0000A028, 00000C00) 1536 KB
P04: modemst2 (0000AC28, 00000C00) 1536 KB
P05: persist (0000B828, 00010000) 32 MB
P06: opporeserve1 (0001B828, 00004000) 8 MB
P07: opporeserve2 (0001F828, 00020000) 64 MB
P08: reserve_exp1 (0003F828, 00001000) 2048 KB
P09: reserve_exp2 (00040828, 00001000) 2048 KB
P10: fsc (00041828, 00000002) 1024 b
P11: ssd (00041830, 00000010) 8 KB
P12: sbl1 (00041840, 00000400) 512 KB
P13: rpm (00041C40, 00000400) 512 KB
P14: tz (00042040, 00001000) 2048 KB
P15: devcfg (00043040, 00000200) 256 KB
P16: sbl1bak (00043240, 00000400) 512 KB
P17: rpmbak (00043640, 00000400) 512 KB
P18: tzbak (00043A40, 00001000) 2048 KB
P19: devcfgbak (00044A40, 00000200) 256 KB
P20: dsp (00044C40, 00008000) 16 MB
P21: DDR (00050000, 00000040) 32 KB
P22: fsg (00050040, 00000C00) 1536 KB
P23: sec (00050C40, 00000020) 16 KB
P24: aboot (00050C60, 00000800) 1024 KB
P25: abootbak (00051460, 00000800) 1024 KB
P26: modem (00051C60, 00040000) 128 MB
P27: dtbo (00091C60, 00004000) 8 MB
P28: vbmeta (00095C60, 00000080) 64 KB
P29: boot (00095CE0, 00020000) 64 MB
P30: recovery (000B5CE0, 00020000) 64 MB
P31: devinfo (000D5CE0, 00000800) 1024 KB
P32: splash (000D8000, 00005800) 11 MB
P33: LOGO (000DD800, 00010000) 32 MB
P34: DRIVER (000ED800, 00010000) 32 MB
P35: cache (000FD800, 00080000) 256 MB
P36: misc (0017D800, 00000800) 1024 KB
P37: keystore (0017E000, 00000400) 512 KB
P38: config (0017E400, 00000040) 32 KB
P39: oem (0017E440, 00000800) 1024 KB
P40: limits (00180000, 00000040) 32 KB
P41: mota (00184000, 00000400) 512 KB
P42: dip (00184400, 00000800) 1024 KB
P43: mdtp (00184C00, 00010000) 32 MB
P44: syscfg (00194C00, 00000400) 512 KB
P45: mcfg (00195000, 00002000) 4 MB
P46: lksecapp (00198000, 00000100) 128 KB
P47: cmnlib (00198100, 00000800) 1024 KB
P48: cmnlib64 (00198900, 00000800) 1024 KB
P49: keymaster (00199100, 00000800) 1024 KB
P50: lksecappbak (00199900, 00000100) 128 KB
P51: cmnlibbak (00199A00, 00000800) 1024 KB
P52: cmnlib64bak (0019A200, 00000800) 1024 KB
P53: keymasterbak (0019AA00, 00000800) 1024 KB
P54: apdp (0019C000, 00000200) 256 KB
P55: msadp (0019C200, 00000200) 256 KB
P56: dpo (0019C400, 00000010) 8 KB
P57: logdump (0019C410, 00020000) 64 MB
P58: vm-kystore (001BC410, 00000800) 1024 KB
P59: vm-data (001BCC10, 00005000) 10 MB
P60: hyp (001C4000, 00004000) 8 MB
P61: vm-system (001C8000, 00020000) 64 MB
P62: vm-linux (001E8000, 00010000) 32 MB
P63: system (001F8000, 006B4800) 3433 MB
P64: vendor (008AC800, 0020FB00) 1055 MB
P65: userdata (00AC0000, 0125EFDF) 9.186 GB
Partition table has been found on device.
Don't forget to reconnect the device after writing to see changes.
Writting partitions. Please wait...
Writing partition misc from C:/Program Files (x86)/Medusa Pro Software/Pin pattren Remove/keep data MISC.bin file... Done.
Writing is finished.
SW: 1.7.7; FW: 1.24.
Reconnect the device to see changesDisconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QE63MB
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100514536334D4203D6EDD33465EF
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QE63MB
Product revision : 0.3
Product serial number : (hex) D6EDD334
Manufacturing date : 06/2018
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7626752 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : a3e00000 bytes
Device sector size : 512 bytes
Partition offset : 2064384
Number of sectors : 7030784
Build ID :OPM1.171019.026
Release ID :8.1.0
Architecture ABI :arm64-v8a
Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi
Build Description :msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20190717.054518 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QE63MB_12_09_2019_11_50_42.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.7; FW: 1.24.
P00: GPT (00000000, 00000028) 20 KB
P01: oppodycnvbk (00000028, 00005000) 10 MB
P02: oppostanvbk (00005028, 00005000) 10 MB
P03: modemst1 (0000A028, 00000C00) 1536 KB
P04: modemst2 (0000AC28, 00000C00) 1536 KB
P05: persist (0000B828, 00010000) 32 MB
P06: opporeserve1 (0001B828, 00004000) 8 MB
P07: opporeserve2 (0001F828, 00020000) 64 MB
P08: reserve_exp1 (0003F828, 00001000) 2048 KB
P09: reserve_exp2 (00040828, 00001000) 2048 KB
P10: fsc (00041828, 00000002) 1024 b
P11: ssd (00041830, 00000010) 8 KB
P12: sbl1 (00041840, 00000400) 512 KB
P13: rpm (00041C40, 00000400) 512 KB
P14: tz (00042040, 00001000) 2048 KB
P15: devcfg (00043040, 00000200) 256 KB
P16: sbl1bak (00043240, 00000400) 512 KB
P17: rpmbak (00043640, 00000400) 512 KB
P18: tzbak (00043A40, 00001000) 2048 KB
P19: devcfgbak (00044A40, 00000200) 256 KB
P20: dsp (00044C40, 00008000) 16 MB
P21: DDR (00050000, 00000040) 32 KB
P22: fsg (00050040, 00000C00) 1536 KB
P23: sec (00050C40, 00000020) 16 KB
P24: aboot (00050C60, 00000800) 1024 KB
P25: abootbak (00051460, 00000800) 1024 KB
P26: modem (00051C60, 00040000) 128 MB
P27: dtbo (00091C60, 00004000) 8 MB
P28: vbmeta (00095C60, 00000080) 64 KB
P29: boot (00095CE0, 00020000) 64 MB
P30: recovery (000B5CE0, 00020000) 64 MB
P31: devinfo (000D5CE0, 00000800) 1024 KB
P32: splash (000D8000, 00005800) 11 MB
P33: LOGO (000DD800, 00010000) 32 MB
P34: DRIVER (000ED800, 00010000) 32 MB
P35: cache (000FD800, 00080000) 256 MB
P36: misc (0017D800, 00000800) 1024 KB
P37: keystore (0017E000, 00000400) 512 KB
P38: config (0017E400, 00000040) 32 KB
P39: oem (0017E440, 00000800) 1024 KB
P40: limits (00180000, 00000040) 32 KB
P41: mota (00184000, 00000400) 512 KB
P42: dip (00184400, 00000800) 1024 KB
P43: mdtp (00184C00, 00010000) 32 MB
P44: syscfg (00194C00, 00000400) 512 KB
P45: mcfg (00195000, 00002000) 4 MB
P46: lksecapp (00198000, 00000100) 128 KB
P47: cmnlib (00198100, 00000800) 1024 KB
P48: cmnlib64 (00198900, 00000800) 1024 KB
P49: keymaster (00199100, 00000800) 1024 KB
P50: lksecappbak (00199900, 00000100) 128 KB
P51: cmnlibbak (00199A00, 00000800) 1024 KB
P52: cmnlib64bak (0019A200, 00000800) 1024 KB
P53: keymasterbak (0019AA00, 00000800) 1024 KB
P54: apdp (0019C000, 00000200) 256 KB
P55: msadp (0019C200, 00000200) 256 KB
P56: dpo (0019C400, 00000010) 8 KB
P57: logdump (0019C410, 00020000) 64 MB
P58: vm-kystore (001BC410, 00000800) 1024 KB
P59: vm-data (001BCC10, 00005000) 10 MB
P60: hyp (001C4000, 00004000) 8 MB
P61: vm-system (001C8000, 00020000) 64 MB
P62: vm-linux (001E8000, 00010000) 32 MB
P63: system (001F8000, 006B4800) 3433 MB
P64: vendor (008AC800, 0020FB00) 1055 MB
P65: userdata (00AC0000, 0125EFDF) 9.186 GB
1. connect with Medusa pro
2. go partition manager
3. tick only MISC and select MISC file
** If u want without data loss dn select "keep data MISC" or If u reset user data dn select "reset MISC"
4. write partition(only tick MISC)
if u see phone still lock !! dont worry, go emergency dial in phone key board and just type *#813#
enjoy.
here is unlock log......................
Welcome to Medusa Pro Software version 1.7.7.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Reader #2: FT SCR2000 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QE63MB
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100514536334D4203D6EDD33465EF
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QE63MB
Product revision : 0.3
Product serial number : (hex) D6EDD334
Manufacturing date : 06/2018
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7626752 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : a3e00000 bytes
Device sector size : 512 bytes
Partition offset : 2064384
Number of sectors : 7030784
Build ID :OPM1.171019.026
Release ID :8.1.0
Architecture ABI :arm64-v8a
Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi
Build Description :msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20190717.054518 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QE63MB_12_09_2019_11_49_48.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.7; FW: 1.24.
P00: GPT (00000000, 00000028) 20 KB
P01: oppodycnvbk (00000028, 00005000) 10 MB
P02: oppostanvbk (00005028, 00005000) 10 MB
P03: modemst1 (0000A028, 00000C00) 1536 KB
P04: modemst2 (0000AC28, 00000C00) 1536 KB
P05: persist (0000B828, 00010000) 32 MB
P06: opporeserve1 (0001B828, 00004000) 8 MB
P07: opporeserve2 (0001F828, 00020000) 64 MB
P08: reserve_exp1 (0003F828, 00001000) 2048 KB
P09: reserve_exp2 (00040828, 00001000) 2048 KB
P10: fsc (00041828, 00000002) 1024 b
P11: ssd (00041830, 00000010) 8 KB
P12: sbl1 (00041840, 00000400) 512 KB
P13: rpm (00041C40, 00000400) 512 KB
P14: tz (00042040, 00001000) 2048 KB
P15: devcfg (00043040, 00000200) 256 KB
P16: sbl1bak (00043240, 00000400) 512 KB
P17: rpmbak (00043640, 00000400) 512 KB
P18: tzbak (00043A40, 00001000) 2048 KB
P19: devcfgbak (00044A40, 00000200) 256 KB
P20: dsp (00044C40, 00008000) 16 MB
P21: DDR (00050000, 00000040) 32 KB
P22: fsg (00050040, 00000C00) 1536 KB
P23: sec (00050C40, 00000020) 16 KB
P24: aboot (00050C60, 00000800) 1024 KB
P25: abootbak (00051460, 00000800) 1024 KB
P26: modem (00051C60, 00040000) 128 MB
P27: dtbo (00091C60, 00004000) 8 MB
P28: vbmeta (00095C60, 00000080) 64 KB
P29: boot (00095CE0, 00020000) 64 MB
P30: recovery (000B5CE0, 00020000) 64 MB
P31: devinfo (000D5CE0, 00000800) 1024 KB
P32: splash (000D8000, 00005800) 11 MB
P33: LOGO (000DD800, 00010000) 32 MB
P34: DRIVER (000ED800, 00010000) 32 MB
P35: cache (000FD800, 00080000) 256 MB
P36: misc (0017D800, 00000800) 1024 KB
P37: keystore (0017E000, 00000400) 512 KB
P38: config (0017E400, 00000040) 32 KB
P39: oem (0017E440, 00000800) 1024 KB
P40: limits (00180000, 00000040) 32 KB
P41: mota (00184000, 00000400) 512 KB
P42: dip (00184400, 00000800) 1024 KB
P43: mdtp (00184C00, 00010000) 32 MB
P44: syscfg (00194C00, 00000400) 512 KB
P45: mcfg (00195000, 00002000) 4 MB
P46: lksecapp (00198000, 00000100) 128 KB
P47: cmnlib (00198100, 00000800) 1024 KB
P48: cmnlib64 (00198900, 00000800) 1024 KB
P49: keymaster (00199100, 00000800) 1024 KB
P50: lksecappbak (00199900, 00000100) 128 KB
P51: cmnlibbak (00199A00, 00000800) 1024 KB
P52: cmnlib64bak (0019A200, 00000800) 1024 KB
P53: keymasterbak (0019AA00, 00000800) 1024 KB
P54: apdp (0019C000, 00000200) 256 KB
P55: msadp (0019C200, 00000200) 256 KB
P56: dpo (0019C400, 00000010) 8 KB
P57: logdump (0019C410, 00020000) 64 MB
P58: vm-kystore (001BC410, 00000800) 1024 KB
P59: vm-data (001BCC10, 00005000) 10 MB
P60: hyp (001C4000, 00004000) 8 MB
P61: vm-system (001C8000, 00020000) 64 MB
P62: vm-linux (001E8000, 00010000) 32 MB
P63: system (001F8000, 006B4800) 3433 MB
P64: vendor (008AC800, 0020FB00) 1055 MB
P65: userdata (00AC0000, 0125EFDF) 9.186 GB
Partition table has been found on device.
Don't forget to reconnect the device after writing to see changes.
Writting partitions. Please wait...
Writing partition misc from C:/Program Files (x86)/Medusa Pro Software/Pin pattren Remove/keep data MISC.bin file... Done.
Writing is finished.
SW: 1.7.7; FW: 1.24.
Reconnect the device to see changesDisconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QE63MB
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100514536334D4203D6EDD33465EF
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QE63MB
Product revision : 0.3
Product serial number : (hex) D6EDD334
Manufacturing date : 06/2018
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7626752 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : a3e00000 bytes
Device sector size : 512 bytes
Partition offset : 2064384
Number of sectors : 7030784
Build ID :OPM1.171019.026
Release ID :8.1.0
Architecture ABI :arm64-v8a
Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi
Build Description :msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20190717.054518 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QE63MB_12_09_2019_11_50_42.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.7; FW: 1.24.
P00: GPT (00000000, 00000028) 20 KB
P01: oppodycnvbk (00000028, 00005000) 10 MB
P02: oppostanvbk (00005028, 00005000) 10 MB
P03: modemst1 (0000A028, 00000C00) 1536 KB
P04: modemst2 (0000AC28, 00000C00) 1536 KB
P05: persist (0000B828, 00010000) 32 MB
P06: opporeserve1 (0001B828, 00004000) 8 MB
P07: opporeserve2 (0001F828, 00020000) 64 MB
P08: reserve_exp1 (0003F828, 00001000) 2048 KB
P09: reserve_exp2 (00040828, 00001000) 2048 KB
P10: fsc (00041828, 00000002) 1024 b
P11: ssd (00041830, 00000010) 8 KB
P12: sbl1 (00041840, 00000400) 512 KB
P13: rpm (00041C40, 00000400) 512 KB
P14: tz (00042040, 00001000) 2048 KB
P15: devcfg (00043040, 00000200) 256 KB
P16: sbl1bak (00043240, 00000400) 512 KB
P17: rpmbak (00043640, 00000400) 512 KB
P18: tzbak (00043A40, 00001000) 2048 KB
P19: devcfgbak (00044A40, 00000200) 256 KB
P20: dsp (00044C40, 00008000) 16 MB
P21: DDR (00050000, 00000040) 32 KB
P22: fsg (00050040, 00000C00) 1536 KB
P23: sec (00050C40, 00000020) 16 KB
P24: aboot (00050C60, 00000800) 1024 KB
P25: abootbak (00051460, 00000800) 1024 KB
P26: modem (00051C60, 00040000) 128 MB
P27: dtbo (00091C60, 00004000) 8 MB
P28: vbmeta (00095C60, 00000080) 64 KB
P29: boot (00095CE0, 00020000) 64 MB
P30: recovery (000B5CE0, 00020000) 64 MB
P31: devinfo (000D5CE0, 00000800) 1024 KB
P32: splash (000D8000, 00005800) 11 MB
P33: LOGO (000DD800, 00010000) 32 MB
P34: DRIVER (000ED800, 00010000) 32 MB
P35: cache (000FD800, 00080000) 256 MB
P36: misc (0017D800, 00000800) 1024 KB
P37: keystore (0017E000, 00000400) 512 KB
P38: config (0017E400, 00000040) 32 KB
P39: oem (0017E440, 00000800) 1024 KB
P40: limits (00180000, 00000040) 32 KB
P41: mota (00184000, 00000400) 512 KB
P42: dip (00184400, 00000800) 1024 KB
P43: mdtp (00184C00, 00010000) 32 MB
P44: syscfg (00194C00, 00000400) 512 KB
P45: mcfg (00195000, 00002000) 4 MB
P46: lksecapp (00198000, 00000100) 128 KB
P47: cmnlib (00198100, 00000800) 1024 KB
P48: cmnlib64 (00198900, 00000800) 1024 KB
P49: keymaster (00199100, 00000800) 1024 KB
P50: lksecappbak (00199900, 00000100) 128 KB
P51: cmnlibbak (00199A00, 00000800) 1024 KB
P52: cmnlib64bak (0019A200, 00000800) 1024 KB
P53: keymasterbak (0019AA00, 00000800) 1024 KB
P54: apdp (0019C000, 00000200) 256 KB
P55: msadp (0019C200, 00000200) 256 KB
P56: dpo (0019C400, 00000010) 8 KB
P57: logdump (0019C410, 00020000) 64 MB
P58: vm-kystore (001BC410, 00000800) 1024 KB
P59: vm-data (001BCC10, 00005000) 10 MB
P60: hyp (001C4000, 00004000) 8 MB
P61: vm-system (001C8000, 00020000) 64 MB
P62: vm-linux (001E8000, 00010000) 32 MB
P63: system (001F8000, 006B4800) 3433 MB
P64: vendor (008AC800, 0020FB00) 1055 MB
P65: userdata (00AC0000, 0125EFDF) 9.186 GB
