-->

Tuesday, September 24, 2019

Successfully repaired dead BOOT G316HU [Answered]

  Unlock4samsung       Tuesday, September 24, 2019
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-G316HU
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G316HU_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Hynix eMMC H4G2b
Page size : 512 B
Block size : 512 B
Block count : 7634944
Size : 3728.00 MB
---------------------------------------------------------------
CID Info

CID : 90014A4834473262110132F91E9C42E9
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H4G2b
Product revision : 0.1
Product serial number : (hex) 32F91E9C
Manufacturing date : 04/2015
---------------------------------------------------------------
CSD Info

CSD : D07F01320F5903FFFFFFFFEF8A4040DB
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x00) RST_n signal is temporary disabled (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1908736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/H4G2b_23_09_2019_12_01_41.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.7; FW: 1.24.
P00: GPT (00000000, 00400000) 4 MB
P01: SBOOT (00400000, 00200000) 2048 KB
P02: SBOOT2 (00600000, 00200000) 2048 KB
P03: wfixnv1 (00800000, 00100000) 1024 KB
P04: wfixnv2 (00900000, 00100000) 1024 KB
P05: tdfixnv1 (00A00000, 00100000) 1024 KB
P06: tdfixnv2 (00B00000, 00100000) 1024 KB
P07: WDSP (00C00000, 00400000) 4 MB
P08: MODEM (01000000, 00800000) 8 MB
P09: MODEM2 (01800000, 00800000) 8 MB
P10: TDDSP (02000000, 00400000) 4 MB
P11: FOTA_SIG (02400000, 00100000) 1024 KB
P12: wruntimenv1 (02500000, 00100000) 1024 KB
P13: wruntimenv2 (02600000, 00100000) 1024 KB
P14: tdruntimenv1 (02700000, 00100000) 1024 KB
P15: tdruntimenv2 (02800000, 00100000) 1024 KB
P16: PARAM (02900000, 00200000) 2048 KB
P17: efs (02B00000, 01400000) 20 MB
P18: prodnv (03F00000, 00500000) 5 MB
P19: RESERVED2 (04400000, 00100000) 1024 KB
P20: KERNEL (04500000, 01000000) 16 MB
P21: RECOVERY (05500000, 01000000) 16 MB
P22: CSC (06500000, 0C800000) 200 MB
P23: system (12D00000, 4B000000) 1200 MB
P24: HIDDEN (5DD00000, 08000000) 128 MB
P25: userdata (65D00000, 82400000) 2084 MB
Repairing from file "C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G316HU_EMMC.srf".
Write data verification is enabled.

Switched to boot area partition 1.
Writing BOOT1 partition... Done.

Switched to boot area partition 2.
Writing BOOT2 partition... Done.

Switched to user area.
Writing GPT partition... Done.
Writing SBOOT partition... Done.
Writing SBOOT2 partition... Done.
Writing wfixnv1 partition... Done.
Writing wfixnv2 partition... Done.
Writing tdfixnv1 partition... Done.
Writing tdfixnv2 partition... Done.
Writing WDSP partition... Done.
Writing MODEM partition... Done.
Writing MODEM2 partition... Done.
Writing TDDSP partition... Done.
Writing FOTA_SIG partition... Done.
Writing wruntimenv1 partition... Done.
Writing wruntimenv2 partition... Done.
Writing tdruntimenv1 partition... Done.
Writing tdruntimenv2 partition... Done.
Writing PARAM partition... Done.
Writing efs partition... Done.
Writing prodnv partition... Done.
Writing RESERVED2 partition... Done.
Writing KERNEL partition... Done.
Writing RECOVERY partition... Done.

Smart Repair is successfully complete.
SW: 1.7.7; FW: 1.24.
Disconnected.

Please disconnect battery and USB cable.

;););)
logoblog

Previous
« Prev Post