I try to connect using the eMMC pinout of SM-J710FN srf i downloaded on the Support and and it is succesfully connected.
I try to repair using factory repair tab but still no power or download mode.
Here are the logs:
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-J710FN
SRF : C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/SAMSUNG_SM-J710FN_EMMC.srf
Voltage : 2.6V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC AJNB3R
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100414A4E42335203DB9DFA9573D7
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : AJNB3R
Product revision : 0.3
Product serial number : (hex) DB9DFA95
Manufacturing date : 07/2016
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 4Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x01) 00000001
Boot bus width : x4 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7692288 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Octoplus Pro JTAG Software/EXT_CSD Backups/AJNB3R_01_03_2018_08_09_06.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.4; FW: 1.23.
P00: GPT (00000000, 00000022) 17 KB
P01: PIT (00000022, 00000010) 8 KB
P02: MD5HDR (00000032, 00000800) 1024 KB
P03: ECT (00001800, 00000800) 1024 KB
P04: BOTA0 (00002000, 00002000) 4 MB
P05: BOTA1 (00004000, 00002000) 4 MB
P06: EFS (00006000, 0000A000) 20 MB
P07: CPEFS (00010000, 00004000) 8 MB
P08: m9kefs1 (00014000, 00002000) 4 MB
P09: m9kefs2 (00016000, 00002000) 4 MB
P10: m9kefs3 (00018000, 00002000) 4 MB
P11: CARRIER (0001A000, 00000800) 1024 KB
P12: PARAM (0001A800, 00004000) 8 MB
P13: BOOT (0001E800, 00010000) 32 MB
P14: RECOVERY (0002E800, 00013000) 38 MB
P15: OTA (00041800, 00004000) 8 MB
P16: CDMA-RADIO (00045800, 00002000) 4 MB
P17: RADIO (00047800, 0002C000) 88 MB
P18: TOMBSTONES (00073800, 00000800) 1024 KB
P19: DNT (00074000, 00000800) 1024 KB
P20: PERSISTENT (00074800, 00000400) 512 KB
P21: PERSDATA (00074C00, 00006000) 12 MB
P22: RESERVED2 (0007AC00, 00001400) 2560 KB
P23: SYSTEM (0007C000, 005DC000) 3000 MB
P24: CACHE (00658000, 00064000) 200 MB
P25: HIDDEN (006BC000, 0001E000) 60 MB
P26: CP_DEBUG (006DA000, 00002800) 5 MB
P27: USERDATA (006DC800, 0167D7DF) 11.25 GB
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-J710FN
SRF : C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/SAMSUNG_SM-J710FN_EMMC.srf
Voltage : 2.6V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC AJNB3R
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100414A4E42335203DB9DFA9573D7
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : AJNB3R
Product revision : 0.3
Product serial number : (hex) DB9DFA95
Manufacturing date : 07/2016
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 4Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x01) 00000001
Boot bus width : x4 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7692288 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Octoplus Pro JTAG Software/EXT_CSD Backups/AJNB3R_01_03_2018_08_09_16.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.4; FW: 1.23.
P00: GPT (00000000, 00000022) 17 KB
P01: PIT (00000022, 00000010) 8 KB
P02: MD5HDR (00000032, 00000800) 1024 KB
P03: ECT (00001800, 00000800) 1024 KB
P04: BOTA0 (00002000, 00002000) 4 MB
P05: BOTA1 (00004000, 00002000) 4 MB
P06: EFS (00006000, 0000A000) 20 MB
P07: CPEFS (00010000, 00004000) 8 MB
P08: m9kefs1 (00014000, 00002000) 4 MB
P09: m9kefs2 (00016000, 00002000) 4 MB
P10: m9kefs3 (00018000, 00002000) 4 MB
P11: CARRIER (0001A000, 00000800) 1024 KB
P12: PARAM (0001A800, 00004000) 8 MB
P13: BOOT (0001E800, 00010000) 32 MB
P14: RECOVERY (0002E800, 00013000) 38 MB
P15: OTA (00041800, 00004000) 8 MB
P16: CDMA-RADIO (00045800, 00002000) 4 MB
P17: RADIO (00047800, 0002C000) 88 MB
P18: TOMBSTONES (00073800, 00000800) 1024 KB
P19: DNT (00074000, 00000800) 1024 KB
P20: PERSISTENT (00074800, 00000400) 512 KB
P21: PERSDATA (00074C00, 00006000) 12 MB
P22: RESERVED2 (0007AC00, 00001400) 2560 KB
P23: SYSTEM (0007C000, 005DC000) 3000 MB
P24: CACHE (00658000, 00064000) 200 MB
P25: HIDDEN (006BC000, 0001E000) 60 MB
P26: CP_DEBUG (006DA000, 00002800) 5 MB
P27: USERDATA (006DC800, 0167D7DF) 11.25 GB
Selected pit file: C:/Users/Realworks/Desktop/SM-J710F_1_20180215092053_9cm8p9wsfm_fac/J7XELTE_EUR_OPEN.pit
Open file "C:/Users/Realworks/Desktop/SM-J710F_1_20180215092053_9cm8p9wsfm_fac/AP_J710FXXU4BRA2_CL12710698_QB16470903_REV03_user_ low_ship_meta.tar.md5".
Open file "C:/Users/Realworks/Desktop/SM-J710F_1_20180215092053_9cm8p9wsfm_fac/BL_J710FXXU4BRA2_CL12710698_QB16470903_REV03_user_ low_ship.tar.md5".
Open file "C:/Users/Realworks/Desktop/SM-J710F_1_20180215092053_9cm8p9wsfm_fac/CP_J710FXXU4BRA5_CL596460_QB8794723_SIGNED.tar.md5 ".
Open file "C:/Users/Realworks/Desktop/SM-J710F_1_20180215092053_9cm8p9wsfm_fac/CSC_OJV_J710FOJV4BRA1_CL12975116_QB16722362_REV03_ user_low_ship.tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Switched to boot area partition 1.
Writing partition BOOTLOADER... Done.
Switched to boot area partition 2.
Writing partition CM... Done.
Switched to user area.
Writing partition PARAM... Done.
Writing partition BOOT... Done.
Writing partition RECOVERY... Done.
Writing partition RADIO... Done.
Writing partition SYSTEM... Done.
Writing partition CACHE... Done.
Writing partition HIDDEN... Done.
Writing partition CP_DEBUG... Done.
Writing partition USERDATA... Done.
Writing is finished.
SW: 1.5.4; FW: 1.23.
I try to repair using factory repair tab but still no power or download mode.
Here are the logs:
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-J710FN
SRF : C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/SAMSUNG_SM-J710FN_EMMC.srf
Voltage : 2.6V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC AJNB3R
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100414A4E42335203DB9DFA9573D7
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : AJNB3R
Product revision : 0.3
Product serial number : (hex) DB9DFA95
Manufacturing date : 07/2016
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 4Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x01) 00000001
Boot bus width : x4 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7692288 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Octoplus Pro JTAG Software/EXT_CSD Backups/AJNB3R_01_03_2018_08_09_06.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.4; FW: 1.23.
P00: GPT (00000000, 00000022) 17 KB
P01: PIT (00000022, 00000010) 8 KB
P02: MD5HDR (00000032, 00000800) 1024 KB
P03: ECT (00001800, 00000800) 1024 KB
P04: BOTA0 (00002000, 00002000) 4 MB
P05: BOTA1 (00004000, 00002000) 4 MB
P06: EFS (00006000, 0000A000) 20 MB
P07: CPEFS (00010000, 00004000) 8 MB
P08: m9kefs1 (00014000, 00002000) 4 MB
P09: m9kefs2 (00016000, 00002000) 4 MB
P10: m9kefs3 (00018000, 00002000) 4 MB
P11: CARRIER (0001A000, 00000800) 1024 KB
P12: PARAM (0001A800, 00004000) 8 MB
P13: BOOT (0001E800, 00010000) 32 MB
P14: RECOVERY (0002E800, 00013000) 38 MB
P15: OTA (00041800, 00004000) 8 MB
P16: CDMA-RADIO (00045800, 00002000) 4 MB
P17: RADIO (00047800, 0002C000) 88 MB
P18: TOMBSTONES (00073800, 00000800) 1024 KB
P19: DNT (00074000, 00000800) 1024 KB
P20: PERSISTENT (00074800, 00000400) 512 KB
P21: PERSDATA (00074C00, 00006000) 12 MB
P22: RESERVED2 (0007AC00, 00001400) 2560 KB
P23: SYSTEM (0007C000, 005DC000) 3000 MB
P24: CACHE (00658000, 00064000) 200 MB
P25: HIDDEN (006BC000, 0001E000) 60 MB
P26: CP_DEBUG (006DA000, 00002800) 5 MB
P27: USERDATA (006DC800, 0167D7DF) 11.25 GB
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-J710FN
SRF : C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/SAMSUNG_SM-J710FN_EMMC.srf
Voltage : 2.6V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC AJNB3R
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100414A4E42335203DB9DFA9573D7
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : AJNB3R
Product revision : 0.3
Product serial number : (hex) DB9DFA95
Manufacturing date : 07/2016
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 4Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x01) 00000001
Boot bus width : x4 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7692288 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Octoplus Pro JTAG Software/EXT_CSD Backups/AJNB3R_01_03_2018_08_09_16.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.4; FW: 1.23.
P00: GPT (00000000, 00000022) 17 KB
P01: PIT (00000022, 00000010) 8 KB
P02: MD5HDR (00000032, 00000800) 1024 KB
P03: ECT (00001800, 00000800) 1024 KB
P04: BOTA0 (00002000, 00002000) 4 MB
P05: BOTA1 (00004000, 00002000) 4 MB
P06: EFS (00006000, 0000A000) 20 MB
P07: CPEFS (00010000, 00004000) 8 MB
P08: m9kefs1 (00014000, 00002000) 4 MB
P09: m9kefs2 (00016000, 00002000) 4 MB
P10: m9kefs3 (00018000, 00002000) 4 MB
P11: CARRIER (0001A000, 00000800) 1024 KB
P12: PARAM (0001A800, 00004000) 8 MB
P13: BOOT (0001E800, 00010000) 32 MB
P14: RECOVERY (0002E800, 00013000) 38 MB
P15: OTA (00041800, 00004000) 8 MB
P16: CDMA-RADIO (00045800, 00002000) 4 MB
P17: RADIO (00047800, 0002C000) 88 MB
P18: TOMBSTONES (00073800, 00000800) 1024 KB
P19: DNT (00074000, 00000800) 1024 KB
P20: PERSISTENT (00074800, 00000400) 512 KB
P21: PERSDATA (00074C00, 00006000) 12 MB
P22: RESERVED2 (0007AC00, 00001400) 2560 KB
P23: SYSTEM (0007C000, 005DC000) 3000 MB
P24: CACHE (00658000, 00064000) 200 MB
P25: HIDDEN (006BC000, 0001E000) 60 MB
P26: CP_DEBUG (006DA000, 00002800) 5 MB
P27: USERDATA (006DC800, 0167D7DF) 11.25 GB
Selected pit file: C:/Users/Realworks/Desktop/SM-J710F_1_20180215092053_9cm8p9wsfm_fac/J7XELTE_EUR_OPEN.pit
Open file "C:/Users/Realworks/Desktop/SM-J710F_1_20180215092053_9cm8p9wsfm_fac/AP_J710FXXU4BRA2_CL12710698_QB16470903_REV03_user_ low_ship_meta.tar.md5".
Open file "C:/Users/Realworks/Desktop/SM-J710F_1_20180215092053_9cm8p9wsfm_fac/BL_J710FXXU4BRA2_CL12710698_QB16470903_REV03_user_ low_ship.tar.md5".
Open file "C:/Users/Realworks/Desktop/SM-J710F_1_20180215092053_9cm8p9wsfm_fac/CP_J710FXXU4BRA5_CL596460_QB8794723_SIGNED.tar.md5 ".
Open file "C:/Users/Realworks/Desktop/SM-J710F_1_20180215092053_9cm8p9wsfm_fac/CSC_OJV_J710FOJV4BRA1_CL12975116_QB16722362_REV03_ user_low_ship.tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Switched to boot area partition 1.
Writing partition BOOTLOADER... Done.
Switched to boot area partition 2.
Writing partition CM... Done.
Switched to user area.
Writing partition PARAM... Done.
Writing partition BOOT... Done.
Writing partition RECOVERY... Done.
Writing partition RADIO... Done.
Writing partition SYSTEM... Done.
Writing partition CACHE... Done.
Writing partition HIDDEN... Done.
Writing partition CP_DEBUG... Done.
Writing partition USERDATA... Done.
Writing is finished.
SW: 1.5.4; FW: 1.23.
