FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Flash
Selected model: SM-J730F
Software version: 30.1
File analysis... OK
Total file size: 0x035E9100 (53 Mb)
Searching USB Flash interface... COM10 detected
Setup connection... OK
Reading PIT from phone... OK
Sending recovery.img... OK
Sending cache.img... OK
Flashing done (time - 00:00:08)
Done with Samsung Tool PRO v.30.1
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Flash
Selected model: SM-J730F
Software version: 30.1
File analysis... OK
Total file size: 0x035E9100 (53 Mb)
Searching USB Flash interface... COM10 detected
Setup connection... OK
Reading PIT from phone... OK
Sending recovery.img... OK
Sending cache.img... OK
Flashing done (time - 00:00:08)
Done with Samsung Tool PRO v.30.1
