elcome to Medusa Pro Software version 1.5.9. Started.
Reader #0: Gemalto e-gate Smart Card 0
Reader #1: Generic EMV Smartcard Reader 0
Reader #2: SCM Microsystems Inc. SCR3310 v2.0 USB SC Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-G532G
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G532G_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Unknown eMMC M MOR
Page size : 512 B
Block size : 512 B
Block count : 3848192
Size : 1879.00 MB
---------------------------------------------------------------
CID Info
CID : 65646F4D204D4F5212A1000006154431
Manufacturer ID : 0X65
Device/BGA : Device (removable)
OEM/Application ID : 0X6F
Product name : M MOR
Product revision : 10.1
Product serial number : (hex) 615
Manufacturing date : 04/2017
---------------------------------------------------------------
CSD Info
CSD : D07FFF320F59007FF6DB80001E40001D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : NO
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 128 Kbytes
Partition config : (0x78) 01111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 131072 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/M MOR_27_09_2018_12_58_21.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.9; FW: 1.23.
any soutions ?
Reader #0: Gemalto e-gate Smart Card 0
Reader #1: Generic EMV Smartcard Reader 0
Reader #2: SCM Microsystems Inc. SCR3310 v2.0 USB SC Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : Samsung
Model : SM-G532G
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/SAMSUNG_SM-G532G_EMMC.srf
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Unknown eMMC M MOR
Page size : 512 B
Block size : 512 B
Block count : 3848192
Size : 1879.00 MB
---------------------------------------------------------------
CID Info
CID : 65646F4D204D4F5212A1000006154431
Manufacturer ID : 0X65
Device/BGA : Device (removable)
OEM/Application ID : 0X6F
Product name : M MOR
Product revision : 10.1
Product serial number : (hex) 615
Manufacturing date : 04/2017
---------------------------------------------------------------
CSD Info
CSD : D07FFF320F59007FF6DB80001E40001D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : NO
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 512 Kbytes
Boot1 size : 2048 Kbytes
Boot2 size : 2048 Kbytes
RPMB size : 128 Kbytes
Partition config : (0x78) 01111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 131072 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/M MOR_27_09_2018_12_58_21.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.5.9; FW: 1.23.
any soutions ?
