phone with user lock and frp on, i wanted to take user data backup, i tried with soldering and reading the user data partition, it went on reading the backup, i kept it to read and went off, when i return it was finish and with error, now its dead and not connecting with emmc ,
Welcome to Medusa Pro Software version 1.6.9.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC RC14MB
Page size : 512 B
Block size : 512 B
Block count : 122142720
Size : 58.24 GB (59640.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100524331344D420CA8E7E00A342F
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RC14MB
Product revision : 0.12
Product serial number : (hex) A8E7E00A
Manufacturing date : 03/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 30531584 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : 8f800000 bytes
Device sector size : 512 bytes
Partition offset : 671744
Number of sectors : 11141120
Device Manufacturer :samsung
Device Platform :msm8953
Build ID :NRD90M
Display Build ID :NRD90M.C701FDDU1BRC2
Release ID :7.0
Device Model :SM-C701F
Device Name :c7proltedd
Architecture ABI :arm64-v8a
Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi
Build Description :c7proltedd-user 7.0 NRD90M C701FDDU1BRC2 release-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/RC14MB_26_10_2018_15_27_13.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.9; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: sbl1 (00002000, 00000400) 512 KB
P02: sbl1bak (00002400, 00000400) 512 KB
P03: ddr (00002800, 00000400) 512 KB
P04: rpm (00002C00, 00000400) 512 KB
P05: tz (00003000, 00001000) 2048 KB
P06: aboot (00004000, 00001000) 2048 KB
P07: sec (00005000, 00000200) 256 KB
P08: lksecapp (00005200, 00000400) 512 KB
P09: keymaster (00005600, 00000200) 256 KB
P10: cmnlib (00005800, 00000200) 256 KB
P11: cmnlib64 (00005A00, 00000200) 256 KB
P12: fsg (00005C00, 00002000) 4 MB
P13: pad (00007C00, 00000400) 512 KB
P14: modemst1 (00008000, 00002000) 4 MB
P15: modemst2 (0000A000, 00002000) 4 MB
P16: efs (0000E000, 00008000) 16 MB
P17: fsc (00016000, 00001A00) 3328 KB
P18: ssd (00017A00, 00000200) 256 KB
P19: devcfg (00017C00, 00000200) 256 KB
P20: apdp (00017E00, 00000100) 128 KB
P21: msadp (00017F00, 00000100) 128 KB
P22: param (00018000, 00006000) 12 MB
P23: backup (0001E000, 00002000) 4 MB
P24: boot (00020000, 00010000) 32 MB
P25: recovery (00030000, 00010000) 32 MB
P26: bota (00040000, 00004000) 8 MB
P27: fota (00044000, 00002000) 4 MB
P28: persist (00046000, 00010000) 32 MB
P29: persistent (00056000, 00000800) 1024 KB
P30: steady (00056800, 00000800) 1024 KB
P31: keystore (00057000, 00000800) 1024 KB
P32: config (00057800, 00000800) 1024 KB
P33: dsp (00058000, 00008000) 16 MB
P34: modem (00060000, 00030000) 96 MB
P35: apnhlos (00090000, 00010000) 32 MB
P36: reserved2 (000A0000, 00004000) 8 MB
P37: system (000A4000, 00AA0000) 5.312 GB
P38: cache (00B44000, 00064000) 200 MB
P39: hidden (00BA8000, 00032000) 100 MB
P40: nad_refer (00BDA000, 00002000) 4 MB
P41: userdata (00BDC000, 0689FFD8) 52.31 GB
Canceling process...
Save to O:/C701/Samsung eMMC RC14MB_Fri Oct 26 2018_15_48_45.mpt file...
Reading partition userdata...
ERROR[007]: Command fail.
At sector 88142208
Attempting to read...
Disconnected.
Welcome to Medusa Pro Software version 1.6.9.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC RC14MB
Page size : 512 B
Block size : 512 B
Block count : 122142720
Size : 58.24 GB (59640.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100524331344D420CA8E7E00A342F
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RC14MB
Product revision : 0.12
Product serial number : (hex) A8E7E00A
Manufacturing date : 03/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 30531584 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : 8f800000 bytes
Device sector size : 512 bytes
Partition offset : 671744
Number of sectors : 11141120
Device Manufacturer :samsung
Device Platform :msm8953
Build ID :NRD90M
Display Build ID :NRD90M.C701FDDU1BRC2
Release ID :7.0
Device Model :SM-C701F
Device Name :c7proltedd
Architecture ABI :arm64-v8a
Architecture ABI List :arm64-v8a,armeabi-v7a,armeabi
Build Description :c7proltedd-user 7.0 NRD90M C701FDDU1BRC2 release-keys
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/RC14MB_26_10_2018_15_27_13.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.9; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: sbl1 (00002000, 00000400) 512 KB
P02: sbl1bak (00002400, 00000400) 512 KB
P03: ddr (00002800, 00000400) 512 KB
P04: rpm (00002C00, 00000400) 512 KB
P05: tz (00003000, 00001000) 2048 KB
P06: aboot (00004000, 00001000) 2048 KB
P07: sec (00005000, 00000200) 256 KB
P08: lksecapp (00005200, 00000400) 512 KB
P09: keymaster (00005600, 00000200) 256 KB
P10: cmnlib (00005800, 00000200) 256 KB
P11: cmnlib64 (00005A00, 00000200) 256 KB
P12: fsg (00005C00, 00002000) 4 MB
P13: pad (00007C00, 00000400) 512 KB
P14: modemst1 (00008000, 00002000) 4 MB
P15: modemst2 (0000A000, 00002000) 4 MB
P16: efs (0000E000, 00008000) 16 MB
P17: fsc (00016000, 00001A00) 3328 KB
P18: ssd (00017A00, 00000200) 256 KB
P19: devcfg (00017C00, 00000200) 256 KB
P20: apdp (00017E00, 00000100) 128 KB
P21: msadp (00017F00, 00000100) 128 KB
P22: param (00018000, 00006000) 12 MB
P23: backup (0001E000, 00002000) 4 MB
P24: boot (00020000, 00010000) 32 MB
P25: recovery (00030000, 00010000) 32 MB
P26: bota (00040000, 00004000) 8 MB
P27: fota (00044000, 00002000) 4 MB
P28: persist (00046000, 00010000) 32 MB
P29: persistent (00056000, 00000800) 1024 KB
P30: steady (00056800, 00000800) 1024 KB
P31: keystore (00057000, 00000800) 1024 KB
P32: config (00057800, 00000800) 1024 KB
P33: dsp (00058000, 00008000) 16 MB
P34: modem (00060000, 00030000) 96 MB
P35: apnhlos (00090000, 00010000) 32 MB
P36: reserved2 (000A0000, 00004000) 8 MB
P37: system (000A4000, 00AA0000) 5.312 GB
P38: cache (00B44000, 00064000) 200 MB
P39: hidden (00BA8000, 00032000) 100 MB
P40: nad_refer (00BDA000, 00002000) 4 MB
P41: userdata (00BDC000, 0689FFD8) 52.31 GB
Canceling process...
Save to O:/C701/Samsung eMMC RC14MB_Fri Oct 26 2018_15_48_45.mpt file...
Reading partition userdata...
ERROR[007]: Command fail.
At sector 88142208
Attempting to read...
Disconnected.
