UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Read Codes via Server
Selected model: SM-G935A
Selected port: COM145 USB Serial Port
Software version: 34.5
Checking Login and Password... OK
Ballance: 5 crd.
You have 5 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SAMSUNG-SM-G935A
Android version: 8.0.0
PDA version: G935AUCS8CRJ2
CSC version: G935AATT8CRJ2
Phone version: G935AUCS8CRJ2
Product code: SM2G935AZSAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: RF8H838TKQV
IMEI: 352331080678637
HW version: REV0.7
RF cal date: 2016.08.30
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2018-10-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM15 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... error (1)
Update your firmware to latest
Done with Samsung Tool PRO v.34.5
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Read Codes via Server
Selected model: SM-G935A
Selected port: COM145 USB Serial Port
Software version: 34.5
Checking Login and Password... OK
Ballance: 5 crd.
You have 5 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SAMSUNG-SM-G935A
Android version: 8.0.0
PDA version: G935AUCS8CRJ2
CSC version: G935AATT8CRJ2
Phone version: G935AUCS8CRJ2
Product code: SM2G935AZSAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: RF8H838TKQV
IMEI: 352331080678637
HW version: REV0.7
RF cal date: 2016.08.30
Chip name: MSM8996
Modem board: MSM8996
Security patch: 2018-10-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM15 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... error (1)
Update your firmware to latest
Done with Samsung Tool PRO v.34.5
