Title says it. Got new Medusa Pro a month ago. Medusa Pro 1.6.9 crashes after it connects to my eMMC with error "No Smart-Card found! Program will now exit.". I can see the connection details in the log (copied below). It then exits and most of the time the software will not reload until I disconnect and reconnect the Medusa Pro. A few times is has corrupted the smart card and required the firmware to be reloaded (I am low on reloads, so if that can be increased also?).
Very rarely it will connect. When connected I was able to use content extractor to download files and partition manager to download whole partitions. Thus I believe my connection is good (able to download 1gb+ without problems).
I have tried it on 2 computers, one desktop, one laptop. Tried multiple USB cables. Even tried with a powered USB hub to give it extra power. Nothing seems to be helping, just random luck on connection. It does seem to connect slightly better on the laptop.
I am working directly on a Tegra 3 SOC using the test points for the eMMC.
Any suggestions would be greatly appreciated.
Very rarely it will connect. When connected I was able to use content extractor to download files and partition manager to download whole partitions. Thus I believe my connection is good (able to download 1gb+ without problems).
I have tried it on 2 computers, one desktop, one laptop. Tried multiple USB cables. Even tried with a powered USB hub to give it extra power. Nothing seems to be helping, just random luck on connection. It does seem to connect slightly better on the laptop.
I am working directly on a Tegra 3 SOC using the test points for the eMMC.
Any suggestions would be greatly appreciated.
Code:
Welcome to Medusa Pro Software version 1.6.9.
Started.
Reader #0: Generic EMV Smartcard Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 4 bits
Bus speed : Auto
Connecting...
Device : Hynix eMMC H8G2d
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A48384732640403FD90DCFBA2F3
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H8G2d
Product revision : 0.3
Product serial number : (hex) FD90DCFB
Manufacturing date : 10/2015
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFFFFFFFEF8A4040D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Connect successful.
---------------------------------------------------------------
SW: 1.6.9; FW: 1.24.
P00: EXT2FS (00001000, 00200000) 1024 MB
P01: EXT2FS (00201000, 00200000) 1024 MB
P02: EXT2FS (00401000, 00040000) 128 MB
P03: EXT2FS (00441000, 00A4F000) 5.154 GB
