UNLOCK INSTRUCTIONS:
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Unlocking TMB using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock TMB via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Unlocking SPR using sever:
1. Insert not SPR card to the phone and power it on.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock...' button, select 'Unlock SPR via Server',
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Read Codes via Server
Selected model: SM-G965U
Software version: 34.8
Checking Login and Password... OK
Ballance: 45 crd.
You have 45 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G965U
Android version: 8.0.0
PDA version: G965USQU1ARBI
CSC version: G965UOYN1ARBI
Phone version: G965USQU1ARB4
Product code: SM-G965UZPAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: R*****6PMWX
IMEI: 35***********41
HW version: REV1.1
RF cal date: 2018.02.18
Chip name: SDM845
Modem board: SDM845
Security patch: 2018-02-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Searching Samsung diag port... detected COM166
Reading phone info... OK
Reading data from phone... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 00000000
NET lock: 01234567
SUB lock: 01234567
SP lock: 01234567
CP lock: 01234567
For check lock status: *#7465625#
Done with Samsung Tool PRO v.34.8
UNLOCK INSTRUCTIONS:
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Unlocking TMB using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock TMB via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Unlocking SPR using sever:
1. Insert not SPR card to the phone and power it on.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock...' button, select 'Unlock SPR via Server',
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Read Codes via Server
Selected model: SM-G965U
Software version: 34.8
Checking Login and Password... OK
Ballance: 35 crd.
You have 35 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G965U
Android version: 8.0.0
PDA version: G965USQU3BRJ5
CSC version: G965UOYN3BRJ5
Phone version: G965USQU3BRJ5
Product code: SM-G965UZPAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: R********X
IMEI: 35***********1
HW version: REV1.1
RF cal date: 2018.02.18
Chip name: SDM845
Modem board: SDM845
Security patch: 2018-10-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Samsung diag port... detected COM166
Reading phone info... OK
Reading data from phone... OK
Searching Ramdump interface... COM4 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 00000000
NET lock: 01234567
SUB lock: 01234567
SP lock: 01234567
CP lock: 01234567
For check lock status: *#7465625#
Done with Samsung Tool PRO v.34.8
credit taken twice
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Unlocking TMB using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock TMB via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Unlocking SPR using sever:
1. Insert not SPR card to the phone and power it on.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock...' button, select 'Unlock SPR via Server',
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Read Codes via Server
Selected model: SM-G965U
Software version: 34.8
Checking Login and Password... OK
Ballance: 45 crd.
You have 45 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G965U
Android version: 8.0.0
PDA version: G965USQU1ARBI
CSC version: G965UOYN1ARBI
Phone version: G965USQU1ARB4
Product code: SM-G965UZPAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: R*****6PMWX
IMEI: 35***********41
HW version: REV1.1
RF cal date: 2018.02.18
Chip name: SDM845
Modem board: SDM845
Security patch: 2018-02-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Searching Samsung diag port... detected COM166
Reading phone info... OK
Reading data from phone... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 00000000
NET lock: 01234567
SUB lock: 01234567
SP lock: 01234567
CP lock: 01234567
For check lock status: *#7465625#
Done with Samsung Tool PRO v.34.8
UNLOCK INSTRUCTIONS:
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Unlocking TMB using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock TMB via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Unlocking SPR using sever:
1. Insert not SPR card to the phone and power it on.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock...' button, select 'Unlock SPR via Server',
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Read Codes via Server
Selected model: SM-G965U
Software version: 34.8
Checking Login and Password... OK
Ballance: 35 crd.
You have 35 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G965U
Android version: 8.0.0
PDA version: G965USQU3BRJ5
CSC version: G965UOYN3BRJ5
Phone version: G965USQU3BRJ5
Product code: SM-G965UZPAATT
CSC country code: USA
CSC sales code: ATT
Phone SN: R********X
IMEI: 35***********1
HW version: REV1.1
RF cal date: 2018.02.18
Chip name: SDM845
Modem board: SDM845
Security patch: 2018-10-01
Boot Warranty bit: 0
SIM State: NETWORK_LOCKED
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Samsung diag port... detected COM166
Reading phone info... OK
Reading data from phone... OK
Searching Ramdump interface... COM4 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 00000000
NET lock: 01234567
SUB lock: 01234567
SP lock: 01234567
CP lock: 01234567
For check lock status: *#7465625#
Done with Samsung Tool PRO v.34.8
credit taken twice
