HELLO I HAVE 2 ALCATEL 3002G
ONE OF THEM WORKS FINE AND THE OTHER HAVE BAD FIREMWARE
I HAVE MANAGED TO READ THE FIRMWARE FOR THE GOOD ONE VIA SIGMABOX. BUT SOMEHOW THE BOX CAN'T WERIT IT TO THE PHONE
IS THERE SOMETHING I DONE WRONG BECAUSE I STILL NOT USED TO SIGMABOX BOX BECAUSE I DONT USE IT MUCH
I HAVE PACK 1 AND 3
LOG
--------- 2019-10-10 11:34:57 ---------
SigmaKey 2.33.07b3 MTK: Write backup
USB Serial Port (COM277), Provider: FTDI, Driver ver.: 2.6.0.0, Date: 22/10/2009, FTDIBUS\COMPORT&VID_0403&PID_6001
Baud rate: 115200
Release "Power on" button!
Baseband Processor: MT625A, HW Rev. A.01, SW Rev. 0.01
Serial number: 8146F54C3BC370E7
Testing external RAM...8 Mb
Detecting flash...SPI, ID: 002CCB19-00000000, manufacturer: Micron
Chip model not detected
File system: 0 bytes @ 00000000
Software IMEI: Not found
Unsupported
ONE OF THEM WORKS FINE AND THE OTHER HAVE BAD FIREMWARE
I HAVE MANAGED TO READ THE FIRMWARE FOR THE GOOD ONE VIA SIGMABOX. BUT SOMEHOW THE BOX CAN'T WERIT IT TO THE PHONE
IS THERE SOMETHING I DONE WRONG BECAUSE I STILL NOT USED TO SIGMABOX BOX BECAUSE I DONT USE IT MUCH
I HAVE PACK 1 AND 3
LOG
--------- 2019-10-10 11:34:57 ---------
SigmaKey 2.33.07b3 MTK: Write backup
USB Serial Port (COM277), Provider: FTDI, Driver ver.: 2.6.0.0, Date: 22/10/2009, FTDIBUS\COMPORT&VID_0403&PID_6001
Baud rate: 115200
Release "Power on" button!
Baseband Processor: MT625A, HW Rev. A.01, SW Rev. 0.01
Serial number: 8146F54C3BC370E7
Testing external RAM...8 Mb
Detecting flash...SPI, ID: 002CCB19-00000000, manufacturer: Micron
Chip model not detected
File system: 0 bytes @ 00000000
Software IMEI: Not found
Unsupported
